How do you remove a keypad lock that needs repairs or which must be replaced? If you have this question and you’re looking for an answer, you’ve come to the right place.
Here we discuss important home or office keypad lock issues, such as:
- Reasons why you may have to remove a keypad lock.
- Steps to follow when removing keypad door locks.
- The best tip you could get about keypad lock removal.
So, let’s get started.
6 reasons why you may need to remove your keypad locks
- The batteries are dead
Most keypad door locks today can run up to 5 years without needing their battery replaced. But sudden power changes, overuse or a problem with the battery may require you to remove the lock to replace the batteries earlier.
- The keypad buttons are sticking
As with any keypad, the buttons on your keypad lock can start to harden or stick due to excessive usage. When this happens, you won’t be able to input your entry code into the lock as easily. You’ll need to remove and repair or replace your keypad lock.
- The keypad buttons have come loose or fallen off
Pressing the buttons too hard can also cause certain components on your keypad lock to become loose or fall off. This type of damage can also occur when you’ve experienced a natural disaster and this has affected the lock. By removing your keypad lock, you can get it changed or fixed.
- There are obvious signs of a break-in
If you’ve had a theft or an attempted break-in, it’s best to remove your current keypad lock and replace it with a new one. This will give you added security and limit the risk of future break-ins.
- The locks are old
As keypad locks become old, they also become outdated and may not serve you in the best way possible. Removing the old lock and replacing it with a modern lock can help you stay up-to-date with the latest security trends.
- You want to undertake renovations
Maybe you’re planning a renovation at your home or your commercial space, which entails changing the location of your doors. In such cases, you don’t need to waste your existing keypad lock. Just remove it and reattach it at the new spot.
How do you remove a keypad lock from your residential or commercial door?
Typically, you will have the keypad lock removal instructions on the lock installation booklet. But, to help you, we’ve listed the step-by-step process you need to follow when removing a keypad lock.
- Step 1: Switch off electricity
Turn off the electrical power at home to ensure it’s safe to work on your keypad lock.
- Step 2: Remove the door holder or knob
There are two sections to a keypad lock. One section is on the outside and has the keypad. The other section is on the inside-facing part of the door and has the door holder or knob. Use a screwdriver to unscrew and take off the door holder or knob.
- Step 3: Unscrew the base plate
This will reveal the base plate underneath. There you’ll see all the plugged-in wires tucked in. There will also be a battery connected to the battery terminals in the battery holder slot. Unplug the wires, unhook the battery from its slot and pull out the battery connection.
Next, remove the base plate from the door. If it’s been screwed on, you’ll need to use a screwdriver to remove it. If it’s a hands-free stick-on model, you can just yank it off.
- Step 4: Unscrew the keypad handle from the front portion of the door
Once you’re done with the back portion, head to the front-facing side of the door. Use a screwdriver to pull off the keypad lock. Remove the face plate that’s securing the latch and bar to the door jamb. Carefully pull out the bar and latch that have been threaded through to the other side of the door. Remove the strike plate off the door by unscrewing the long screws inside.
Once you do all this, you’ll be left with only the large hole that had been cut out to install your keypad lock.
What you’ve been waiting for – The best tip ever about keypad lock removal
While this process does seem easy, there is a lot that can go wrong. You may forget to switch off the power and this can make the keypad lock removal process dangerous. Or you may remove the lock incorrectly, which can damage it.
If you were planning to install it elsewhere, the damage to the lock during removal will make it unusable. Or, you might just get confused about which wires are connected to what component and how to unplug them. This can make the keypad lock removal process time-consuming and frustrating.
This is why it’s better to entrust the experts with keypad lock removal. At Speedy Locksmiths can help you with keypad lock removal and keypad lock repairs in Kansas City.
We have assisted hundreds of clients by providing keypad lock repair and replacement services. We can visit your property, understand your keypad lock requirements, remove the lock and reattach or dispose-off the lock as you need.
Our process is quick and seamless and your keypad lock will be removed in no time. Feel free to contact us to schedule a visit. As your local emergency locksmith company, we hope we have answered your question of “how do you remove a keypad lock?”.
Mobile Locksmith Service Areas
Mobile Locksmith Merriam
Mobile Locksmith, Prairie Village
Mobile Locksmith, Olathe
Mobile Locksmith, Leawood, Kansas
Mobile Locksmith, Overland Park
Mobile Locksmith, Lenexa
Mobile Locksmith, Shawnee
Mobile Locksmith, Mission
Mobile Locksmith, Kansas City, KS
Mobile Locksmith, Kansas City, Missouri